Diesel oil extension chamber-Parking heating stainless steel

Is the wood heating combustion chamber easy to break?

If the wood heating combustion chamber is improperly used, it is easy to catch fire and damage. The operation of wood heating combustion chamber must strictly comply with the safety operation regulations to ensure safe use and avoid accidents.

Whether the wood heating chamber has a combustion net

yes. If the atomization net is not installed, it will lead to excessive carbon deposition and serious consequences. The basic principle of diesel heating is to directly burn diesel to obtain heat. Diesel heating is to directly heat the air to get warm air, and the parking preheater is to heat the antifreeze after diesel combustion to preheat the engine. The structure of the two is slightly different.

How to open the wood-heating combustion chamber on CNC？

The starting steps of parking wood heating are as follows: 1. The working principle of parking wood heating is that the main motor of the heater drives the plunger oil pump, combustion support fan and atomizer to rotate. The oil pump sends the fuel inhaled to the atomizer through the oil pipeline, and the atomizer mixes the fuel atomized with the air inhaled by the combustion support fan in the main combustion chamber through the action of centrifugal force, and is ignited by the hot electric plug. After full combustion in the rear combustion chamber, the heat is transferred to the medium coolant in the interlayer of the water jacket through the inner wall of the water jacket and the heat sink above. After heating, the medium circulates in the whole pipeline system under the action of circulating water pump (or heat convection), in order to achieve the purpose of heating. The exhaust gas from the heater is discharged from the exhaust pipe. During the use of air heater in winter, the smoke outlet of the machine must not exhaust smoke in the direction of upwind, so as to avoid the backfilling of combustion waste gas into the cab, causing carbon dioxide poisoning. Use as much time as possible in the use of high-grade operation combustion, to avoid the heater combustion chamber carbon deposition.