The wind heating parking heater is a heating device that is electrically controlled and driven by a fan and oil pump. It uses fuel as fuel, air as medium, and a fan to drive the rotation of the impeller to achieve combustion of fuel in the combustion chamber. Then, heat is released through the metal shell. Due to the action of the external impeller, the metal shell
continuously exchanges heat with the flowing air, ultimately achieving heating of the entire space.
Application scope
The wind heating parking heater studio is not affected by the engine, providing fast heating and simple installation. Make it widely used in various fields such as transportation vehicles, RVs, construction machinery, cranes, etc.
Purpose and Function
Preheating, defrosting of car windows, and heating and insulation of the mobile cabin and cabin.
Inappropriate situation for installing air heaters
Avoid prolonged heating in living rooms, garages, weekend vacation homes without ventilation, and hunting cabins to prevent the risk of poisoning caused by combustion gases. It is not allowed to use in flammable and explosive places with combustible gases and dust. Do not heat or dry living organisms (humans or animals), avoid using direct blowing to heat items, and blow hot air directly into the container.
Safety instructions for product installation and operation
Installation of wind heating heaters
It is necessary to prevent thermal sensitive objects around the heater from being affected or damaged by high temperatures, and take all defensive measures to avoid injury to personnel or damage to objects carried.
Fuel supply
① The plastic fuel tank and fuel injection port must not be located in the driver’s or passenger’s cabin, and the cover of the plastic fuel tank must be tightened to prevent fuel from flowing out. If fuel leaks from the oil system, it should be immediately returned to the service provider for repair The supply of wind heating fuel should be separated from the supply of automotive fuel The heater must be turned off when refueling.
Exhaust emission system
① The exhaust outlet must be installed outside the vehicle to prevent exhaust gas from entering the driver’s cabin through ventilation devices and hot air inlet cargo windows The exhaust emission outlet must avoid flammable materials and prevent heating goods from igniting combustible materials on the ground During the operation of the heater, the surface of the exhaust pipe will be very hot, and sufficient distance should be maintained from heat sensitive components, especially fuel pipes, wires, rubber parts, combustible gases, brake hoses, etc. ④ The exhaust emissions are harmful to human health, and it is prohibited to sleep in the car during the operation of the heater.
Combustion air inlet
The air intake must not draw in the combustion air used for heater combustion from the driver’s cabin. It must draw in fresh circulating air from a clean area outside the car to ensure oxygen supply. It is necessary to prevent exhaust gases from the heater or other parts of the car from entering the combustion air intake system. At the same time, it should be noted that the air intake should not be obstructed by objects when installed.
Heating air inlet
① Protective barriers should be installed at the air inlet to prevent objects from interfering with the operation of the fan.
② The heated air is composed of fresh circulating air.
assemble parts
During installation and maintenance, only original accessories and accessories are allowed to be used. It is not allowed to change the key components of the heater, and the use of parts from other manufacturers without our company’s permission is prohibited.
take care
1. During the operation of the heater, it is not allowed to stop the heater by powering off. To increase the service life of the machine, please turn off the switch and wait for the heater to cool down before leaving. If the power is accidentally cut off during the operation of the heater, please immediately turn on the power and turn the switch to any position for heat dissipation.
2. The positive pole of the main power supply must be connected to the positive pole of the power supply.
3. It is strictly prohibited to connect any switches to the wiring harness.
Post time: Dec-02-2023