Purpose: For various vehicle engine low temperature start, for windshield defrost and indoor heating supply heat source
Maiyoute automobile new energy parking air heater function: heating automotive engine circulation medium – antifreeze, the heat will be directly transferred to the car radiator, defroster, for low temperature engine start and indoor heating to provide heat source.
Installation of new energy parking air heater of Maiyoute Automobile: it is connected with the circulation system of the engine.
Purpose of new energy parking air heater of Maiyoute Automobile: 1. Heating for the cab of engineering vehicles and heavy trucks. 2. Defrost the windshield glass.
Maiyoute Automobile new energy parking air heater function: heating the air circulation medium, the heat is directly transmitted to the car, for the windshield defrosting and indoor heating to provide heat source.
Installation of new energy parking air heater of Maiyoute Automobile: Independent installation will compose circulation system of inlet and outlet air and car compartment.
Use and maintenance of Maiyoute Automobile new energy Parking air heater:
With the improvement of passenger comfort requirements, except for a few hot areas, warm air system has become the basic configuration of passenger cars. The correct use and maintenance of the warm air system of the passenger car is not only beneficial to prolong the service life of the warm air system, but also to eliminate the hidden danger of insecurity.
Use of heater
1. Switch panel introduction
Take the switch panel of a vehicle fuel heater as an example, its switch functions are as follows:
A. Heater water pump switch: used to turn on or off the water pump in the heating system
B. Heater switch: used to turn on or off the heater
C. Heat sink switch: used to turn on or off the fan on the heat sink
D. Defroster switch: used to turn on or off the fan on the defroster
2. Use the operation method
A. Press the switch of the heater pump, and the pump will work. The switch can be used to heat the car and defrost the windshield.
B. Press the heater switch, and the heater starts to work and automatically ignits.
C. When the heater is on fire, the controller will automatically cut off the electric plug and the heater will work normally.
D. Heater inlet water temperature sensor automatically controls the temperature of coolant in the circulating system. When the temperature of the water inlet reaches 80℃; At 65℃, the pump continues to work.
E. shutdown: first turn off the heater switch, then turn off the water pump switch, do not turn off first
Turn off the water pump and then the heater.
Post time: Dec-16-2022